RV Power Gear Slide Out Motor, Motorhome Replacement Gearbox Motor | in-Wall Dual Shaft, 131:1 Gear Ratio, 12V DC, Replace# 523900 522967 523143 523983 521976 523529 524327 K01265B300 K01469B300 etc.
$150.99
Features
〘OEM STANDARD〙This RV Slide Out Motor is manufactured in accordance with OE specifications. Meet or exceed OEM standards and can be directly installed. The wires can be directly connected to the original connector; the motor spindle bolts and receptacle fit closely to ensure stable installation and use.
〘REPLACEMENT NUMBER〙Directly fit for 523900, 520819, 521976W, 521976, 522967, 523036, 523143, 523432, 523498, 523529, 523931, 523983, 524094, 524097, 524246, 524327, 524411, 13-1109, 13-1119, 13-1133, 130-1164, 130-1187, 130-1219, 130-1235, 130-1204c, K01265B300, K01265E300, K01265F300, K01285F300, K01469B300, K01531A300, 1510000006, etc. Please refer to your user manual before purchasing to ensure compatibility.
〘UPGRADED QUALITY〙This slide out motor can provide excellent performance and long service life. Cast aluminum gear housing and motor end cap with steel motor frame. 12V DC electro-mechanical brake on rear of motor with manual release lever. Better circuit connection and surface treatment process than most similar products. Replace the old slide-out motor and enjoy your travel time!
〘EASY TO INSTALL〙Our Slide Out Motor is the same size as the original parts, you can directly replace it yourself and finish it in 10 minutes! It saves you the time of changing back and forth, and also helps you save money. (Tips: The detailed replacement steps are in the description.)
〘100% SATISFACTION SERVICE〙If you have any questions or dissatisfaction, please email us and we will help you solve it perfectly - 36 Months Warranty & 24 Hours Service.
Description
RV POWER GEAR SLIDE-OUT MOTOR
Product Specifications:
- Torque: 850 in-lbs
- Holding Torque: 500 in-lbs
- Speed: 9 RPM @ 850 in-lbs,17 Amps 12 RPM @ 400 in-lbs,9.5 Amps 14 RPM (no load)
- Reversibility: Rotation Reversible
- 131:1 Gear Ratio
- In-wall dual shaft
- Duty Intermittent
How to Replace?
- Make sure all power going to the motor is turned off
- Leave the slide open about 6 inches so that there's no pressure on the drive shaft that connects to each side of the motor
- Disconnect the shafts from the motor by removing the bolts that fasten the shafts (these square tubing shafts are telescopic so you can easily slide them out of the way)
- Slide the other shaft on the other side of the motor out of the way
- Unplug the 12-volt wire harness, then remove the 4 bolts holding the motor on the center plate and the motor will come off
- Check if everything matches in the old and new motor, including the wire harness plug, and align the new motor on the mounting plate
- Bolt the new motor back in with all 4 bolts and tighten them down
- Reconnect the shafts, if the bolt holes don't line up, reconnect the wire harness and have someone operate the slide switch until you can slide the bolt back in
- If both sides or one side is slightly off, use a pair of channel locks to adjust it so you can insert the bolt
- Once the bolt is back in, tighten it
- Securely strap the wire harness to the motor to keep it out of the way and prevent tangling or accidental contact while moving items in and out of the cargo compartment
- Test the motor by operating the slide in and out a few times to ensure it works properly
Details
Introducing the RV Power Gear Slide Out Motor - the ultimate motorhome replacement gearbox motor that is guaranteed to enhance your RV experience. Manufactured in accordance with OE specifications, this motor meets and exceeds OEM standards, ensuring a seamless installation process. With wires that can be directly connected to the original connector and motor spindle bolts and receptacle that fit closely together, you can rest assured that this motor will provide a stable and reliable performance. Don't settle for anything less than OEM standard - upgrade to the RV Power Gear Slide Out Motor today!
Looking for a direct replacement? Look no further. Our Slide Out Motor is designed to fit perfectly with popular replacement numbers such as 523900, 522967, 523143, and many more. Check your user manual for compatibility before purchasing to ensure a hassle-free replacement. With our upgraded quality, you can trust that our motor will deliver excellent performance and long service life. The cast aluminum gear housing and motor end cap, paired with a strong steel motor frame, make this motor durable and reliable for your RV adventures. Say goodbye to the old and welcome the new with the RV Power Gear Slide Out Motor!
Installing our Slide Out Motor is a breeze. Designed to be the same size as the original parts, you can easily replace it yourself in just 10 minutes! No need to waste time going back and forth between repair shops - save time and money by doing it yourself. Detailed replacement steps are provided in the description, making it even easier for you to enjoy your travel time. Take control of your RV's slide out system with the RV Power Gear Slide Out Motor!
At RV Power Gear, we are committed to your satisfaction. Our Slide Out Motor comes with a 36-month warranty and 24 hours of service. If you have any questions or issues, simply email us and we will provide you with the perfect solution. Don't miss out on this opportunity to upgrade your RV's slide out system - get your RV Power Gear Slide Out Motor today and experience the difference!
Ready to upgrade your RV? Get your RV Power Gear Slide Out Motor now!
Discover More Best Sellers in Motors
Shop Motors
$31.99


$18.88


$6.99


New HVAC Blower Fan Switch Plug Connector Pigtail Compatible with Toyota Truck 4Runner Tacoma Rav4
$16.99


$49.99


$42.99


BRTEC HVAC Blower Motor Assembly for Audi 2009-12 A4/S4, 2008-12 A5/S5, 2010-16 Q5
$50.99




$15.99
