FGJQEFG 7 Inch Black Universal Slim Fan Push Pull Electric Radiator 12V 80W High Performance Cooling Fan Mount Kit Set of 2

A radiator cooling fan is a device that can help regulate engine temperature by pulling air through a radiator. The fan consists of 10 pieces of curved blade type, and the motor is reversible, perfect for turbo applications. The ultra slim design made it a lot easier to be installed easily against your radiator. 7 Inch Black Universal Slim Fan Push Pull Electric Radiator 12V 80W High Performance Cooling Fan Mount Kit Set of 2 Fitment: It's a universal fit cooling fan. Make sure the fan size is correct with your original. This is a great electric fan that fits for radiators, oil coolers, transmission coolers, condensers, and more. These powerful electric fans work with electrical systems and draw 6 to 10 amps, depending on the size. We have sizes 7", 10", 12", 16" to choose from.

Step 1: Open the hood of the car and remove the intake pipe above the cooling fan, so that the cooling fan can be removed smoothly.

Step 2: The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car.

Step 3: Install the new cooling fan correctly on the new fan frame, and tighten and secure the four screws at the four corners.

Step 4: Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position.

Step 5: Tighten the fixing screws of the intake pipe, close the hood, and test to ensure that the new radiator fan is working properly and all operations are completed. (For non-professionals, professional installation is strongly recommended.)

Pusher Fans mount on the grille side(front) of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core, and exits out the back side of the radiator. Pusher fans are typically used where there is a limited amount of space for a properly sized puller fan.

Puller Fans mount on the engine side(back) of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out of the back side of the radiator. Puller fans are the desired and most common way of mounting a fan when space is not a limitation between the front of the engine and the back of the radiator core.

Step 1: Confirm the width and depth of your radiator

Step 2: Compare the fan diameter and depth with radiator

Step 3: Choose the right size fan

Keep your engine cool. Also allow quicker warm-ups and cool-downs, longer water pump life, less fan noise, improved air conditioner performance, and improved gas mileage. All parts are under strict quality control not just before shipment but also through the production process. Each step of production multiple quality control checks are performed to ensure the quality of each and every part.