OBD2 Scanner Diagnostic Tool FOXWELL NT630 Plus, Car Code Reader ABS Bleeding Scan Tool SRS Scanner Bidirectional Control with Airbag Light Reset SAS Calibration Oil Light EPB Service Tool

🚩Professional but Easy to Use for ABS SRS AIRBAG

Plug this abs scanner to your vehicle OBD2 port to scan & find the ABS/SRS issues when the light was on the dashboard and guide you how to make the light off after faults repaired. And the abs code reader will also perform depth functions that no odb2 scanner less than $400 can do like initialize/reset/calibrate after maintenance. 👉TIPS: The airbag code reader can NOT clear airbag crash data/collision data even replace the new airbag.

🥇NO.1 ABS BLEEDING SCAN TOOL

If the brake pedal was always slowly sinking down or got loose? This abs brake auto bleed scan tool will bleed the brake, cycling the pump & valves to get a tight brake pedal. No need to cost hundreds to own a foxwell obd2 scanner with abs auto bleed can solve your issues. Refer to the step on the screen, even a beginner can do it. Note: Coverage will be vary on different cars, please confirm it BEFORE purchase. Suggest to manual bleed if auto bleed not support.

✨2023 BIG SURPRISE: Update the car scanner to get the OIL light & EPB service. Every time when your car's oil changed or other faults caused the warning light, it's important to reset the oil change indicator to get the safety driving. After replacing the brake pads/actuator/rotor/caliper, the MIL should go off with EPB reset and make the EPB switch to operate normally. Note: Coverage is vary on different cars, confirm before purchase. Oil &EPB resets can be available after car faults solved.

👍Cost Less than $150 to Own a ABS SRS BIDIRECTIONAL SCAN TOOL

It’s so valuable to own one with active test feature that never find on similar code readers & scan tools. This abs car code reader allows you to control the ABS/Airbag system and components to test hidden car faults. When you exit the test, the system/components return to normal operation. 🔁Warm tips: Only ABS/SRS modules is supported. If you need bi-directional test for other modules, please choose NT809 or higher version.

🌈SAS CALIBRATION TOOL & AIRBAG LIGHT RESET

🞩NOTE: Before resetting airbag, please make sure the software version is V4.02.001(NOT support crash codes). Reading the airbag faults when the light was on and help you to reset the error codes after solving the faults. Also runs calibration of the steering angle sensor,which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. On successful calibration of the sensor, the fault is automatically cleared.

⛳User Friendly OBD2 Scanner for All Vehicles

This NT630 car diagnostic tool will scan all of your obd2 modules, show you the live data & I/M readiness status before the annual inspection. Monitoring the module’s health, locate bad sensors like which cylinder was misfire and more obd2 modules’ faults. Guide you to do the maintenance work to make it safety driving again. Reducing the potential driving risk and keep a peak performance for a safety journey.

🎯GRAPH LIVE DATA + LIFETIME FREE UPDATE + FREE HANDHELD CARRYING CASE

The lifetime free update tool FoxAssist allows you to update software/ save & print diagnostic data/ gain more newly vehicle models. Graph live data provide you intuitive view on car conditions. And Foxwell technical assistance will provide timely and effectively solutions within 24 Hours. This vehicle code reader is packaged with handheld carrying case, easy-taking and all-round protection than nylon case.